Pepperl+Fuchs  Inductive sensor NBB2-V3-E2 -087719

Inductive sensor NBB2-V3-E2

• Basic series
• 2 mm flush
• 3-wire DC

• Veri sayfası alıntısı: Teknik veriler  NBB2-V3-E2

  General specifications
  Switching function		Normally open (NO)
  Output type		PNP
  Rated operating distance		2 mm
  Installation		flush
  Output polarity		DC
  Assured operating distance		0 ... 1.62 mm
  Reduction factor rAl		0.35
  Reduction factor rCu		0.2
  Reduction factor r304		0.7
  Output type		3-wire
  Nominal ratings
  Operating voltage		10 ... 30 V DC
  Switching frequency		0 ... 1000 Hz
  Reverse polarity protection		reverse polarity protected
  Short-circuit protection		pulsing
  Voltage drop		≤ 3 V
  Operating current		0 ... 100 mA
  Off-state current		0 ... 0.5 mA typ. 0.1 µA at 25 °C
  No-load supply current		≤ 15 mA
  Switching state indicator		LED, yellow
  Functional safety related parameters
  MTTFd		3560 a
  Mission Time (TM)		20 a
  Diagnostic Coverage (DC)		0 %
  Compliance with standards and directives
  Standard conformity
  	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
  Approvals and certificates
  EAC conformity		TR CU 020/2011
  UL approval		cULus Listed, General Purpose
  CSA approval		cCSAus Listed, General Purpose
  CCC approval		CCC approval / marking not required for products rated ≤36 V
  Ambient conditions
  Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
  Mechanical specifications
  Connection type		cable PVC , 130 mm
  Core cross-section		0.14 mm2
  Housing material		PBT
  Sensing face		PBT
  Degree of protection		IP67
  Cable
  	Cable diameter	3 mm + 0.3 mm
  	Bending radius	> 10 x cable diameter