Lütfen Bekleyin
  • language tr
    • Hızlı iletisim

    Ürün Detay

    1. Ana Sayfa
    2. Ürünlerimiz
    3. Beckhoff KL2701 Bus Terminal, 1-channel solid state relay output, 0…230 V AC/DC, 3 A

    Beckhoff KL2701 Bus Terminal, 1-channel solid state relay output, 0…230 V AC/DC, 3 A

    Fiyat

    99 €

    Beckhoff KL2701  Bus Terminal, 1-channel solid state relay output, 0…230 V AC/DC, 3 A KL2701 | Bus Terminal, 1-channel solid state relay output, 0…230 V AC/DC, 3 A       The KL2701 output terminal uses an electronic load relay to switch a mains voltage of up to 230 V AC/DC with an output current of 3 A. The switchin

    Açıklama Ürün Videosu Müşterilerimiz ne diyor:

    Beckhoff KL2701  Bus Terminal, 1-channel solid state relay output, 0…230 V AC/DC, 3 A

    KL2701 | Bus Terminal, 1-channel solid state relay output, 0…230 V AC/DC, 3 A

     

     

    KL2701 | Bus Terminal, 1-channel solid state relay output, 0…230 V AC/DC, 3 A

     

    The KL2701 output terminal uses an electronic load relay to switch a mains voltage of up to 230 V AC/DC with an output current of 3 A. The switching element is a high-power MOSFET, which is connected to the power contact potential. As a semiconductor switch, it is not subject to wear. The KL2701 terminal has one independent output. Its signal state is indicated by means of a light emitting diode.

    Technical data KL2701, KS2701
    Connection technology 2-/3-/4-wire
    Number of outputs 1 x make contact
    Nominal voltage 0…230 V AC/DC
    Load type ohmic, inductive
    Max. output current 3 A steady load
    Surge voltage protection from 400 V AC
    Peak current 5 A (20 s), 50 A (100 ms)
    Switching current peak current: 5 A (20 s), 50 A (100 ms)
    Recommended fuse ≤ 10 A fast fuse
    Contact resistance 0.1 Ω typ.
    Switch-off time 2…4 ms
    Residual voltage (100 mΩ)
    Electrical isolation 500 V (K-bus/field voltage), 2500 V AC (1 min.)
    Leakage current (OFF state) << 1 mA
    Switching speed typ. 1.65 ms, 5 ms max.
    Current consumption power contacts only leakage and load current
    Current consumption K-bus typ. 65 mA
    Bit width in the process image 2 outputs
    Configuration no address or configuration setting
    Weight approx. 55 g
    Operating/storage temperature 0…+55 °C/-25…+85 °C
    Relative humidity 95 %, no condensation
    Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
    EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
    Protect. rating/installation pos. IP20/variable
    Pluggable wiring for all KSxxxx Bus Terminals
    Approvals/markings CE

    To top

    Housing data KL-12-8pin KS-12-8pin
    Design form compact terminal housing with signal LEDs terminal housing with pluggable wiring level
    Material polycarbonate
    Dimensions (W x H x D) 12 mm x 100 mm x 68 mm
    Installation on 35 mm DIN rail, conforming to EN 60715 with lock
    Side by side mounting by means of double slot and key connection
    Marking labeling of the BZxxx series
    Wiring solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver
    Connection cross-section s*: 0.08…2.5 mm²,
    st*: 0.08…2.5 mm²,
    f*: 0.14…1.5 mm²    		 s*: 0.08…1.5 mm²,
    st*: 0.08…1.5 mm²,
    f*: 0.14…1.5 mm²
    Connection cross-section AWG s*: AWG 28…14,
    st*: AWG 28…14,
    f*: AWG 26…16    		 s*: AWG 28…16,
    st*: AWG 28…16,
    f*: AWG 26…16
    Stripping length 8…9 mm 9…10 mm
    Current load power contacts Imax: 10 A